Yihi SX270 Vsticking VIY POD Set

[Dj_]

Vsticking presents an innovative 1.8 ml Pod Kit with the brand new and modern Yihi SX270 chipset. The round and ergonomic shape makes the VIY Pod Set perfect and comfortable to hold. The workmanship and the processed materials are very high quality, excellent painting, great zinc alloy (it weighs ~70 grams). The operability is very easy.

The Pod Set gets its power from a integrated 750 mAh battery, which can be conveniently charged via micro USB port. The vaper (that is, our kind) can choose between different, appealing color variations. The Yihi SX270 chipset can operate with a maximum of 12 watts in two different modes (low wattage = 9 watts / high wattage = 10 -12 Watts). In addition, it has a temperature control (so with temp limit ~220⁰C, not ' replay mode ') with dry burn protection. The working mode and the battery charge level are clearly displayed via the integrated LEDs of the device which are located below the USB port(sideward another LED to indicate only the charging, it can be green or red).

The cartridge of the VIY has a capacity of 1.8 ml and an integrated 1.0 Ω SS 316 coil. The pod is refilled cleanly and conveniently via the bottom fill system, which can be closed with a silicone stopper. There is an opening on the side of the pod that allows fresh air to enter the inside of the pod, making the draft resistance quite tight. Especially fans of MTL and rDL vaping get their money's worth with these pods.

All in all, Vsticking presents with the VIY Pod Set a modern and innovative pod system, has maximally functional AFC (~2mm air vent that can be pulled up and down, fully closed or left wide open) with which the vaper can experience a perfect taste and vape experience and which can become the perfect everyday companion.

http://www.vsticking.com/Product/Pod_System/146.html

Reparacija grejača je izuzetno laka, raznovrsne gumice, silikon su veoma kvalitetne.

Dry burn:
Kad se izvadi stara vata, brenerom treba spaliti žicu, dva puta na jedan sekund, pa u vodu jednom na pola sekundi
Sveža vata, i ' zdravo đaci '
Zamena celog grejača je takođe smešno lako, jedino ' treba nabaviti ' NR-R-NR (sa nogicama bez otpora) SS 316 L žice, 0.8 Ω - 1.2 Ω (! ne radi ispod 0.8 Ω !)
Ali! Za pet evra se dobija dva kartridža u pakovanju, znači i to je opcija da se ne menja žica nego povremeno ceo kartridž.















PS: negde sam čitao da sam napisao da ću jednom otvoriti, napisati VIY temu

#majPOD

[PøisøN]

Jeste, bilo obećano
Svakako, zanimljiv pod i laka reparacija.
Fino je kada ima izbora pod sistema i većeg kvaliteta.. (i Evolv ima svoj pod, npr)

[Dj_]

Delovi, 100% rebuildable

◔‿◔

[Vapester]

au ovo nesto besno

[soulm8]

Jel ima neki video kako se radi reparacija

[Dj_]

@soulm8
https://www.e-cigserbia.com/showthread.php?p=512553
Edit:
http://www.youtube.com/watch?v=1jQtsuQ0wZs

Ne početi raditi sa metalnim šrafcigerom ili pincetom!
Nokti, plastični alat, keramička pinceta ✓

Ne raditi dry burn sa original SS žicom !
TC(temperature control)je u funkciji (automatski ~220⁰C)!
Koristiti brener upaljač, paziti na NR (no resistance) spoj.✓

PS: elektronika (SX 270) će raditi sa bilo kojom vrstom žice (kanthal, NiCr, ..), važno da otpor bude 0.8 - 1.5Ω . Dva režima 9 i 12W bez TC
Sent from tvOS

[Dj_]

U zadnje vreme kad menjam sve stavljam NiCr nr-r-nr 1.2 Ohm žicu i fiberglas umesto vate (seljački TC)

[Dj_]

Uspešno zamenjena baterija
Kad sam otvorio, vidim baterija nije zalepljena, kao da su i unutrašnjost predvideli za ' rebuild '
Za manje od deset minuta sam završio

Sent from Cosmo Communicator